Brushing my teeth on a Sunday morning I glanced upon the new toothpaste tube and wondered what's the volume of the paste in it. So many of our daily use pastes and gels - toothpastes, shaving creams, face-washes, ointments and many others - come in this weird shape that I don't have a name for. Let me call it the

*tube*. The mensuration tables we all studied in school gave us the formulae for the volumes of common shapes such as cube, cuboid, sphere, cylinder, cone etc. But they didn't talk about this ubiquitous shape!

If you look at the horizontal cross section of a right circular cone, it starts out with a big circle at the bottom and as you move up, the circle becomes smaller and smaller till you finally reach a point. The cross section of the tube also starts out with a circle, but as you move up, one of the two principal axes of the circle starts shrinking (minor axis) while the other starts increasing (major axis). You end up with flatter and flatter ellipses finally reaching a line segment of length 3.14xR when the ellipse is completely flattened out at the top.

Let us assume that the tube tapers off linearly and hence it should look like a triangle from the side view as shown above. Another simplifying assumption is to neglect the effect of the increasing major axis, hence taking it as a constant. As per this assumption the major axis stays at 2R throughout. In other words, the semi-major axis stays at R throughout. (A more accurate analysis taking into account the tapering of the major axis can be found in part two)

The volume of the elemental ellipse of thickness 'dx' located at a distance 'x' from the top is given by,

We get the total volume of the tube by integrating the above elemental volume for 'x' varying from 0 to h,

That's an intuitively pleasing result because it tells us that the volume of the tube is in between the volume of a cone and that of a cylinder having the same base radius and height.

**Applying the result:**

For the toothpaste tube I was using, R=1.6 cm and h=13.8 cm which gives a volume of about 55.5 ml as per the formula derived above. Since the tube is brand new, it's likely to have a bulging profile as opposed to the triangular one assumed above. So, the volume would actually be slightly larger than the calculated value. Let's take it as 60 ml. The net weight marked on the tube is 150 gm. Hence the density of the paste is (150 gm)/(60 ml) = 2.5 gm/ml, that's two and a half times the density of water.

No wonder, however small amount of toothpaste you put into water, it's bound to sink!

This comment has been removed by the author.

ReplyDeleteInteresting...Since the tapering is linear, did u observe that the volume of (lalit's tube) is nothing but half the volume of the cylinder ... :)

ReplyDeleteuuuuhhhh !!! Please...

ReplyDelete"No wonder, however small amount of toothpaste you put into water, it's bound to sink!"

ReplyDeleteAwesome conclusion at the end :-)

Excellent !!!

@ satish:

ReplyDeleteThat's a nice and intuitive way to check the result :)

@ Smita:

Since these kinds of posts may cause severe mental torture to certain audience, reader discretion is advised ;)

@ Mohammadi:

Thanks :)

Part-2 is coming soon...

This blog is profound. Your findings are cool :)

ReplyDeletePlease find my posts here:

Haircules Speaketh!

Love is two way street

Please promote / vote for them if you find them interesting.

Keep Blogging! :)